eONPUIR

xmlui.ArtifactBrowser.ConfigurableBrowse.title.metadata.type

xmlui.ArtifactBrowser.ConfigurableBrowse.title.metadata.type

Отсортировать по: Порядку: Результаты:

  • Finite Element Analysis of Profile Grinding Temperature 
    Lishchenko, Natalia; Ліщенко, Наталя Володимирівна; Лищенко, Наталия Владимировна; Larshin, Vasily; Ларшин, Василь Петрович; Ларшин, Василий Петрович; Uminsky, Sergey; Уминський, Сергій Михайлович; Уминский, Сергей Михайлович (Springer, Cham, 2020)
    The analysis of equations for determining the grinding temperature taking into account the curvature of the grinding profile, is performed. Mathematical models of the temperature field were proposed, which makes it possible ...
  • Forced Cooling Modeling in Grinding 
    Lishchenko, Natalia; Ліщенко, Наталя Володимирівна; Лищенко, Наталия Владимировна; Larshin, Vasily; Ларшин, Василь Петрович; Ларшин, Василий Петрович; Marchuk, Irina; Марчук, Іріна Вікторівна; Марчук, Ирина Викторовна (Springer, Cham, 2020)
    A mathematical model is developed for a grinding temperature cycle, invariant to the machining material properties and grinding modes with the managed dimensionless parameters of forced cooling, taking into account the ...
  • Grinding Temperature Penetration Depth Study 
    Larshin, Vasily; Ларшин, Василь Петрович; Ларшин, Василий Петрович; Lishchenko, Natalia; Ліщенко, Наталя Володимирівна; Лищенко, Наталия Владимировна (Springer, Cham, 2019)
    Grinding temperature spreads over the depth of the surface layer and in some cases causes the appearance of grinding burns and micro-cracks. These thermal grinding defects are located at a certain depth from the surface ...
  • Solid Lubricants Used in Small Diameter Drilling 
    Lishchenko, Natalia; Ліщенко, Наталя Володимирівна; Лищенко, Наталия Владимировна; Larshin, Vasily; Ларшин, Василь Петрович; Ларшин, Василий Петрович; Marchuk, Irina; Марчук, Іріна Вікторівна; Марчук, Ирина Викторовна (Springer, Cham, 2020)
    Lubricants are either design materials or additional means for metalworking. In the first case, the lubricants should reduce friction and wear of working machines parts. In the second case, they should improve the machinability ...