Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://dspace.opu.ua/jspui/handle/123456789/9698
Полная запись метаданных
Поле DCЗначениеЯзык
dc.contributor.authorBezpalova, A.-
dc.contributor.authorLebedev, V.-
dc.contributor.authorTonkonogyi, V.-
dc.contributor.authorMorozov, Y.-
dc.contributor.authorFrolenkova, O.-
dc.date.accessioned2019-11-27T10:08:35Z-
dc.date.available2019-11-27T10:08:35Z-
dc.date.issued2020-
dc.identifier.citationBezpalova A., Lebedev V., Tonkonogyi V., Morozov Y., Frolenkova O. (2020) Cutting Stone Building Materials and Ceramic Tiles with Diamond Disc. Advances in Design, Simulation and Manufacturing II : Proceeding of the 2-nd International Conference of Design, Simulation, Manufacturing. The Innovation Exchange, DSMIE-2019, Lutsk, Ukraine, June 11-14, 2019, 510 - 521.en
dc.identifier.citationCutting Stone Building Materials and Ceramic Tiles with Diamond Disc / A. Bezpalova, V. Lebedev, V. Tonkonogyi [et.al]. Advances in Design, Simulation and Manufacturing II : Proceeding of the 2-nd International Conference of Design, Simulation, Manufacturing. The Innovation Exchange, DSMIE-2019, Lutsk, Ukraine, June 11-14, 2019, - Р. 510 - 521.en
dc.identifier.issn2195-4356-
dc.identifier.urihttp://dspace.opu.ua/jspui/handle/123456789/9698-
dc.identifier.uri10.1007/978-3-030-22365-6_18-
dc.description.abstractDuring the repair and restoration of buildings, ceramic tiles and blocks of Al2O3 and ZrO2 are often cut. At present diamond abrasive discs are widely used for these purposes. The cutting process is accompanied by a considerable heat release and heating of the diamond disc. At a temperature of about 600°, the tensile strength of a disc is reduced by a factor of 2 and graphitization of diamond grains occurs. Thus, when cutting stone and building materials with a diamond disc, the disc heating temperature should not exceed 600 °C. In the work, mathematical modeling of the diamond cutting disc heating on a metal base was performed while cutting ceramic materials to determine the time of continuous operation to a critical temperature of 600 °C. The simulation results obtained showed the dependence of the heating temperature of the disc on the diameter of the latter, the speed of rotation, the minute feed, the grain size and the thickness of the disc. It is shown that by selecting appropriate process characteristics the time of continuous operation can be of the order of 10–12 min without the use of forced cooling.en
dc.language.isoenen
dc.publisherSpringer, Chamen
dc.subjectDiamond cutting discen
dc.subjectDisc temperatureen
dc.subjectCeramics ZrO2en
dc.titleCutting Stone Building Materials and Ceramic Tiles with Diamond Discen
dc.typeArticle in Scopusen
opu.kafedraКафедра Інформаційних технологій проектування в машинобудуванніuk
opu.citation.journalLecture Notes in Mechanical Engineeringen
opu.citation.firstpage510en
opu.citation.lastpage521en
opu.staff.idvmt@opu.uaen
Располагается в коллекциях:Матеріали конференцій, семінарів каф. ІТПМ

Файлы этого ресурса:
Файл Описание РазмерФормат 
Design.pdf409.43 kBAdobe PDFПросмотреть/Открыть
Cutting2.pdf1.25 MBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.