eONPUIR

xmlui.ArtifactBrowser.ConfigurableBrowse.title.metadata.type

xmlui.ArtifactBrowser.ConfigurableBrowse.title.metadata.type

Отсортировать по: Порядку: Результаты:

  • Evolution of Trolley-bus: Directions, Indicators, Trends 
    Hutyria, Serhii; Гутиря, Сергій Семенович; Гутыря, Сергей Семенович; Chanchin, Andriy; Чанчин, Андрій Миколайович; Чанчин, Андрей Николаевич; Yahlinskyi, Victor; Яглінський, Віктор Петрович; Яглинский, Виктор Петрович; Khomiak, Yuriy; Хомяк, Юрій Мефодійович; Хомяк, Юрий Мефодиевич; Popov, Vadym; Попов, Вадим Олександрович; Попов, Вадим Александрович (2020-01)
    Focus of customers only on the best model’ parameters of urban wheel transport with electric drive (trolley-, electric- and hybrids) presented at the world market today leads to objective lag minimum in five and more years ...
  • An Experiment on the Joint use of the Heuristic and Project Methods at the University 
    Ivanova, Svitlana; Іванова, Світлана Володимирівна; Иванова, Светлана Владимировна; Dimitrov, Lubomir; Димитров, Любомир; Ivanov, Viktor; Іванов, Віктор Володимирович; Иванов, Виктор Владимирович; Naleva, Galyna; Налева, Галина Василівна; Налева, Галина Васильевна (IEEE Xplore, 2019)
    An experiment was conducted to check the relationship between the results of the project team work and the selection of team members that takes into account personality types of students. In the first kind of project team ...
  • Experimental and Analytical Study of CBN Grinding of Welded Martensitic Aging Steel. 
    Lebedev, V.; Tonkonogyi, V.; Chumachenko, T.; Klymenko, N.; Frolenkova, O. (Springer, Cham, 2020)
    Martensitic aging steels (Marging steels—MS) are high-alloyed low-carbon (0.03% C) structural steels based on the Fe–Ni and Fe–Cr–Ni systems, additionally doped with cobalt, molybdenumtitaniumetc. The article presents the ...
  • Experimental Study of the Process of Borazon Grinding of Thermal Barrier Coating of ZrO 
    Lebedev, V.; Tonkonogyi, V.; Vaysman, V.; Frolenkova, O.; Chumachenko, T (Springer, 2020-01)
    When grinding thermo-barrier sprayed coatings, there is always a potential dan-ger of damage due to cutting forces. It is also necessary to take into account grinding contact temperatures, the thermal field of which can ...
  • EXPLORING THE EFFICIENCY OF THE COMBINED APPLICATION OF CONNECTION PRUNING AND SOURCE DATA PRE-PROCESSING WHEN TRAINING A MULTILAYER PERCEPTRON 
    Galchonkov, O.; Nevrev, A.; Glava, M.; Babych, M.; Галчёнков, О. Н.; Неврев, А. И.; Глава, М. Г.; Бабич, Н. И. (PC «TECHNOLOGY CENTER», 2020)
    Традиционной схемой работы с нейронными сетями до недавнего времени было задание архитектуры нейронной сети и её последующее обучение. Однако последние исследования в этой области показали, что заданные и настроенные таким ...
  • Food enterprises innovative activity organizing 
    Horodetska, Tetyana; Ivanchuk, Kateryna; Niekrasova, Liubov; Semerun, Lyudmyla; Zaychenko, Kateryna (Consulting & Training Centre KEY, 2019)
    The purpose of the study is to analyze the ways of enhancing innovation activity and to substantiate the methodological and practical aspects of creating an effective system of food industry enterprises innovative activity ...
  • Formation advertising strategies of Ukrainian pharmaceutical companies with the use of imitative model-simulators 
    Kapustyan, Iryna; Sokolovska, Zoya; Frolova, Larysa; Semerun, Liudmyla (2019-03-31)
    The purpose of the article is to study the various processes in the development of advertising strategies of pharmaceutical companies, based on using tools in a multilevel simulation platform – AnyLogic. From this, the ...
  • Formation of methodical foundations for assessing the innovative development potential of an industrial enterprise 
    Chukurna, Olena; Niekrasova, Lubov; Dobrianska, Natalia; Izmaylov, Ya.; Shkrabak, I.; Ingram, K.; Чукурна, Олена Павлівна; Нєкрасова, Любов Аркадіївна; Добрянська, Наталя Анатоліївна; Ізмайлов, Я. О.; Шкрабак, І. В.; Інграм, K. Л.; Чукурна, Елена Павловна; Некрасова, Любовь Аркадьевна; Добрянская, Наталья Анатольевна (2020)
    Purpose. Formation of methodological foundations for assessing the innovative development potential of an industrial enterprise. The rationale for the use of a comprehensive system of indicators that will allow conducting ...
  • Fundamentals of the System Simulation Methodology “Person-Machine” in Project and Program Management 
    Voloshenko, Maryna; Волошенко, Марина Олександрівна; Волошенко, Марина Александровна; Бакуліч, Олена Олександрівна; Бакулич, Елена Александровна; Bakulich, Olena (IAEME Publication, 2020-03)
    In the article, the authors examined the problematic aspects of project management; the study focuses on the optimization of the crew of the vessel – the project team based on the simulation method. Within the framework ...
  • GAS FLAME STRUCTURE AND OPTICAL ASSESSMENT OF THE FLAME SPEED AND COMBUSTION EFFICIENCY 
    Trofimenko, M. Yu.; Aslanov, S. K.; Dragan, G. S.; Smolyar, V. P. (Інститут теоретичної фізики ім. М.М.Боголюбова Національної Академії Наук України, 2020-06-09)
    We perform the analysis of a prepared propane-butane flame structure, by using the computer processing of the radiation from the chemical reaction zone. We mark out the stoichiometric reaction along with the zones of the ...
  • Gear-Grinding Temperature Modeling and Simulation 
    Lishchenko, Natalia; Larshin, Vasily (Springer, Cham, 2020)
    New trends in the manufacture of gears are associated with the use of new gear-grinding technologies. Discontinuous profile gear grinding by a profile wheel, compared to the continuous generating gear grinding by a grinding ...
  • Harmonization of the EU and Ukrainian Normative Documentation: Case Study on Determination of Barium Content in Mineral Waters to Develop Quality and Safety Criteria 
    Kysylevska, Alona; Prokopovych, Ihor; Oborskyi, Hennadii; Babov, Konstantin; Arabadji, Mykhailo; Кисилевська, Альона Юріївна; Прокопович, Ігор Валентинович; Оборський, Геннадій Олександрович; Бабов, Костянтин Дмитрович; Арабаджи, Михайло В'ячеславович; Кисилевская, Алёна Юрьевна; Прокопович, Игорь Валентинович; Оборский, Геннадий Александрович; Бабов, Константин Дмитриевич; Арабаджи, Михаил Вячеславович (Springer Nature Switzerland AG, 2020)
    The article presents the results of a study on the development of a criterion for the quality and safety of barium content in mineral waters in order to harmonize regulatory documents of the European Union and Ukraine. To ...
  • Heating rate of granular inorganic materials by microwave radiation 
    Solonenko, L. I.; Bilyi, O.Р.; Repiakh, S. I. ; Kimstach, T.V.; Uzlov, K. I.  (Національний технічний університет «Дніпровська політехніка», м. Дніпро., 2020)
    Purpose. Determining heating rate of granular materials of inorganic origin used for manufacturing foundry molds and rods in the field of ultra-high frequency radiation, dependence of the heating rate of materials on the ...
  • Heuristic Techniques as Part of Heuristic Methods and Interaction of Personality Types in their Application 
    Ivanov, Victor; Іванов, Віктор Володимирович; Иванов, Виктор Владимирович; Dimitrov, Lubomir; Димитров, Любомир; Ivanova, Svitlana; Іванова, Світлана Володимирівна; Иванова, Светлана Владимировна; Olefir, Olena; Олефір, Олена Іванівна; Олефир, Елена Ивановна (2021)
    The widespread team project method is more effective when used in conjunction with heuristic methods. The large number of heuristic methods and the variety of their descriptions create a problem to prepare students for ...
  • Hidden Fault Analysis of FPGA Projects for Critical Applications 
    Drozd, Oleksandr; Perebeinos, Ihor; Martynyuk, Oleksandr; Zashcholkin, Konstantin; Ivanova, Olena; Drozd, Myroslav; Дрозд, Олександр Валентинович; Перебейнос, Ігор Олександрович; Мартинюк, Олександр Миколайович; Защолкін, Костянтин Вячеславович; Іванова, Олена Миколаївна; Дрозд, Мирослав Олександрович; Дрозд, Александр Валентинович; Перебейнос, Игорь Александрович; Мартынюк, Александр Николаевич; Защелкин, Константин Вячеславович; Иванова, Елена Николаевна; Дрозд, Мирослав Александрович (2020)
    This paper focuses on the problem of hidden faults, which is seen like a growth one inherent in modern safety-related systems. The special feature of these is the designing for operation in two modes: normal and emergency. ...
  • Identification of the oculo-motor system based on the Volterra model using eye tracking technology 
    Pavlenko, Vitaliy; Milosz, Marek; Dzienkowski, Mariusz; Павленко, Віталій Данилович; Павленко, Виталий Данилович (IOP Publishing, 2020)
    Instrumental algorithmic and software tools for constructing a nonparametric dynamic model of the human oculo-motor system (OMS) based on its inertial and nonlinear properties are developed in the paper on the basis of ...
  • Improving Efficiency of Asset Management in the Context of Ensuring Competitiveness of Mechanical Engineering Enterprises in Developing Countries 
    Yepifanova, Iryna; Єпіфанова, Ірина Миколаївна; Епифанова, Ирина Николаевна (Lifescience Global, 2019)
    The research paper deals with the formation of new scientific solutions regarding increasing the efficiency of asset management in the context of ensuring the competitiveness of mechanical engineering enterprises in ...
  • Improving Management Decisions in Urban Passenger Transport Based on the Sociological Study 
    Bashynska, Iryna; Biskup, V.; Kuz’kin, O.; Hryzovska, L.; Shapoval, G.; Башинська, Ірина Олександрівна; Башинская, Ирина Александровна (2020-10-30)
    This paper aims to conduct a sociological survey and the results of the formation of theoretical and methodological principles and practical recommendations for improving management decisions in urban passenger transport. ...
  • Improving the Performance Properties of Abrasive Tools at the Stage of Their Operation 
    Tonkonogyi, Vladimir; Sidelnykova, Tetiana; Dašić, Predrag; Yakimov, Alexey; Bovnegra, Liubov (Springer, Cham, 2020)
    Grinding performance largely depends on the durability of the abrasive tool. Developed and tested solid lubricant for impregnating the working surface of the grinding wheel, which increases its cutting ability and, as a ...
  • Improving the Ship’s Power Plant Automatic Control System by Using a Model-Oriented Decision Support System in Order To Reduce Accident Rate Under the Transitional and Dynamic Modes of Operation 
    Voytetsky, Igor; Voytetskaya, Taisiya; Vyshnevskyi, Leonid; Kozyryev, Igor; Maksymova, Oksana; Maksymov, Maksym; Максимов, Максим Віталійович; Максимов, Максим Витальевич,; Kryvda, Viktoriia; Кривда, Вікторія Ігорівна; Крывда, Виктория Игоревна (2021)
    This paper proposes a method to improve the performance of a ship's power plant by reducing accidents within it under transitional operating modes. The method is based on decreasing the number of service personnel errors ...