Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://dspace.opu.ua/jspui/handle/123456789/10736
Название: Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors
Авторы: Ivanov, Viktor
Іванов, Віктор
Иванов, Виктор
Urum, Galyna
Урум, Галина
Ivanova, Svitlana
Іванова, Світлана
Ключевые слова: Crowning profile
Spur bevel gears
Deliberately mounting deviation
Дата публикации: Июн-2020
Издательство: Springer
Библиографическое описание: Ivanov, V., Urum, G., Ivanova, S. (2020). Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors. New Technologies, Development and Applications, International Conference, June, Part of the "Lecture Notes in Networks and Systems" book series, Vol. 128, p. 89-97.
Ivanov, V. Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors / V. Ivanov, G. Urum, S. Ivanova // New Technologies, Development and Applications : International Conference, June. - 2020. - Р. 89-97. - (Part of the "Lecture Notes in Networks and Systems" book series, vol. 128).
Краткий осмотр (реферат): Spur bevel gears are characterized by a load concentration at the ends of the teeth, where gear teeth are at their weakest. To reduce load concentration at the ends of the teeth, the modification is used by longitudinal crowning of a flank profile. The crowning contact in a spur bevel gear can be achieved through deliberately introduced mounting errors. With a deviation of the shaft angle along with the deviation mounting distance, it is possible to achieve initial contact in the middle of gear tooth surfaces. The problem of the theory of gearing is solved - dependencies are obtained to determine the initial contactpoint of the teeth. For this, the intersection line of an octoid surface of the tooth and a plane of gearing was found, in the presence of mounting errors. The trajectory of the contact point on the surface of the teeth during mating was determined. The maximum achievable contact crowning values are given depending on the degree of transmission accuracy and the total number of teeth. Crowning is calculated for the range of modules 6.3… 10. A fixture design for controlling axial displacement during gear assembly has been developed.
URI (Унифицированный идентификатор ресурса): http://dspace.opu.ua/jspui/handle/123456789/10736
DOI: 10.1007/978-3-030-46817-0_10
Располагается в коллекциях:Матеріали конференцій, семінарів каф. МДМ

Файлы этого ресурса:
Файл Описание РазмерФормат 
Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors.pdf179.77 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.